First filter included with every grille · One-time purchase · Check your fit
Reorder filters Shop the grille
Impeccable Air

Your return vent.
Now with a filter.

Catch dust as room air enters your ductwork. A replaceable filter sits behind the grille, within reach whenever it needs a check or a change.

  • Catches dust at the return opening
  • Removable front for easy filter changes
  • One-time purchase · $5.00 replacement filters
$36.35per grille
First filter included
Check my fit View dimensions

For exact horizontal 14″ × 6″ return openings.
Baseboard or sidewall · Keep your primary HVAC filter.

Delivery and tax calculated at checkout.
The actual Impeccable Air assembly rendered with the front open and its replaceable filter lifted out. The replaceable filter
Filtration starts right here.

An activated-carbon pad, just behind the front.

Designed to belong.
Built to do more. Explore the product in 3D

Make it part of your home

Choose the right fit for your home.

Start with three quick checks. Then choose baseboard, sidewall, or a mix for your home.

Check your returns

Confirm these for every opening in this order.

How to tell

With the HVAC fan running, hold a tissue near the grille. A return pulls it inward; a supply blows it away.

Return airflow draws room air into the vent; supply airflow blows air into the room

Choose either or both grille styles below.

What to measure

Remove the existing grille and measure the bare duct opening. Measure width first, then height. Do not use the outside dimensions of the grille.

Measure the bare duct opening behind the grille, 14 inches wide by 6 inches high

Three quick checks, then you’re ready to add your grilles.

Keep your primary HVAC filter in place. Confirm compatibility with your HVAC system before adding filters.

Build your order

Count compatible returns, not rooms.

White Impeccable Air baseboard grille installed at the wall–floor junction

Baseboard grille

Where the wall meets the floor. Secures with screws.

$36.35 with first filter pad

White Impeccable Air sidewall grille installed higher on a wall

Sidewall grille

On the wall. Installs with friction-fit clips.

$36.35 with first filter pad

Impeccable Air replacement filter pad

Extra filter pads

Optional. A first pad already comes with every grille.

$5.00 each

Already have your grilles? Shop replacement filters →

02What it doesFig. 02

A filter within reach.

A replaceable activated-carbon filter sits behind the grille, where room air enters the ductwork. Remove the front to check or change it. Keep your primary HVAC filter in place — Impeccable Air works alongside it.

How it works, step by step
Fig. 02 — Exploded assembly
Exploded drawing: the backplate with its molded Y-frame retention and clips, the replaceable activated-carbon filter pad, and the removable front grille shown apart.
Backplate + Y-frame retention · activated-carbon filter pad · removable front
03Find your fitFig. 03

Will it fit?

Measure the openingDiagram showing the current cover removed and the bare duct opening measured: fourteen inches wide by six inches tall.
Fig. 03aThe bare duct opening14.00 × 6.00 in
Front elevationFront elevation of the grille with its overall dimensions marked.
Fig. 03bGrille, front elevation15.75 × 7.75 in

The current grille is designed for an exact 14″ × 6″ duct opening. Any other size is reviewed individually — run the fit guide and email us your measurements. Wall openings only — never ceilings, never supply vents.

Check my fit
04One grille, two placementsFig. 04

At the baseboard. On the wall.

A white baseboard return grille beside grey trim and wood-look flooring.

Baseboard

Square lower corners let the grille sit flush where the wall meets the floor.

A white return grille installed high on a beige wall.

Sidewall

Three friction-fit clips — one top, two bottom — secure the grille in an exact 14″ × 6″ wall opening. The clips hold it without tools, and the front opens for filter changes.

Note

Not an exact 14″ × 6″ opening? Run the fit guide — other sizes are reviewed individually, never approved automatically.

05Dimensions & materialFig. 05

Dimensions & material.

Exterior15.75″ W × 7.75″ H

  • Duct opening14″ × 6″
  • Materialwhite ABS
  • Frontremovable front makes grille cleaning easier.
Full spec sheet for pros
Side profileSide profile drawing: the grille body against a wall section, its clips engaging the duct, with the filter shown between the parts.
Fig. 05Profile against the wall section
06The filterFILT1406001
The pre-cut activated-carbon filter pad.
Fig. 06Pre-cut activated-carbon pad

A fresh filter when you need it.

Every grille includes its first activated-carbon filter. Pre-cut replacements are $5.00 each, ready to fit into the frame.

Shop replacement filters
07EvidenceMethods

See what the testing shows.

01Pressure

Airflow resistance, measured

An independent laboratory measured airflow resistance across a clean filter pad sealed in a laboratory duct fixture — a bench measurement of the pad, not of the assembled grille, a loaded filter, or any home.

How it was measured
02Chamber

Chamber-tested filtration

Read the results of controlled-chamber particulate testing, with the tested configuration and laboratory conditions explained alongside them. Study report available

See lab results
03Media

The media itself

A replaceable activated-carbon filter pad. Activated carbon adsorbs certain odors and gases under appropriate conditions.

About the media
Limits

Chamber and bench results describe tested configurations — real homes vary with HVAC design, runtime, installation, and filter condition.

08InstallationFig. 08

Installation.

All installation steps
09From real ownersHomeDepot.com

From real owners.

“The install is very easy and I can't understand why filtered home air isn't the norm.”

— Gucc9769, Home Depot review, Aug 2024

“After 60 days of installation, we were stunned at all the dust the filter captured!”

— Vinman7879, Home Depot review, Aug 2024

“Easy to install and maintenance will be a breeze!!!!”

— Frank, Home Depot review, Aug 2024

Reviews from HomeDepot.com customers of the filtered return grille.

10Shipping, returns, warrantyPolicies

Shipping, returns, warranty.

Shipping, returns, and warranty terms are on our policy pages.

Shipping Policy Refund Policy Terms of Service Support & FAQs
11Before you buySupport

The questions everyone asks first.

Return / SupplyComparison drawing: a return grille draws room air inward, while a slimmer supply register pushes conditioned air out into the room.
Fig. 11Returns pull in — supplies push out
All support answers
  • 01

    Is this for a return vent or a supply vent?

    Returns only — the openings that pull air in when the fan runs. The fit guide walks you through a quick tissue test.

  • 02

    What exactly do I measure?

    The duct opening behind your current grille — never the grille itself.

  • 03

    Does it replace my furnace filter?

    No — it’s designed to work alongside your primary filter, not instead of it.

  • 04

    How often do I replace the filter?

    Inspect around every 90 days. Pets, home projects, and system runtime affect how quickly the filter collects dust.

Start here

Start with the fit.

Check my fit